Install New Dresser Drawer Pulls
Dresser drawer pulls – If you want to install new doors and drawer fronts or replace your kitchen cabinets, place the strip correctly is important. Fix the strip to a comfortable and able to provide the greatest leverage to open doors and drawers height. Once you have decided where to place the knobs or handles use a template to repeat throughout the facility precise placement.
Place plastic template hardware in the corner of a dresser drawer pulls door. Select the hole or holes that align with the pre-selected position. Mark the center of all its drawers with an erasable and carpenter Square placing a single central flip marker. Place a drawer extraction template on a box and the notch on the top edge of the template with your brand line.
Use a separate template corner door when pulled on both sides of wider dresser drawer pulls. Place the template on the door or drawer. Mark the outline of the hole with a sharp pencil. Squeeze a strip of wood on the inside face of the door or drawer, covering the position of the holes will be drilled.
Select a drill larger than the diameter of the screws hardware 1/64 inch drill bit. Drill holes with a cordless drill pilot using the notch left by the punch guide. When installing handles, place the handle on the side of the box with the aligned holes. Insert the screws from inside and tighten with a screwdriver. Do not over tighten.